![emulator mess force mac to boot from floppy emulator mess force mac to boot from floppy](http://www.bigmessowires.com/wp-content/uploads/2011/12/daisy-chainer-135.jpg)
This resulted in dead pixels on what would otherwise be a perfect raster screen typically showed when the SE/30 boots up, hence the Simasimac display. This is the photo of another SE/30 logic board – click on it to view the high-res version:Īn educated guess would be that some of the data bits feeding into the video RAM were not having the correct values, probably due to broken PCB traces or vias resulting from the leak. Without going into the details, the schematics shows several 74F253 (4-input Multiplexer with Tri-state Output) connected to two D41264C (64K X 4 Video DRAM), which is then connected to UK6, a 2764 serving as the video ROM. For a start, check out the SE30_P5.GIF file for the video section.
Emulator mess force mac to boot from floppy zip file#
The first thing to try was to download the logic board and analog board schematics of the SE/30 and many other similar compact Mac on this site. They are in GIF format and not high resolution, but good enough to get me started. You can also download a hosted ZIP file with all the schematics from here. Perhaps there is a common fault somewhere that can easily be fixed? But before that, my curiosity led me onto a different path, that is to investigate why many SE/30 end up with the exactly same Simasimacs screen, down to the pixels. to remove all the leaky SMD electrolytic capacitors on the board and replaced it with new ones.
![emulator mess force mac to boot from floppy emulator mess force mac to boot from floppy](https://www.bigmessowires.com/wp-content/uploads/2021/02/IMG_0651sh2.jpg)
The only thing I could do at this stage was a recap, e.g. The same symptoms persisted even with all the RAM, ROM and video ROM removed, so it was probably not a problem with the ROM or RAM as mentioned on the website. The checkerboard pattern was no longer shown, instead I experienced the classic Simasimac screen as described here: On the next attempt to power on the machine, the symptoms changed. I removed the battery, cleaned the motherboard thoroughly and soldered in a new 3.6V battery purchased from eBay: I opened up the case and immediately found out a potential cause – the 3.6V PRAM lithium battery has leaked all over the place: Unfortunately my SE/30 has refused to boot up, showing the notorious checkerboard screen, after having been powered off for a couple of years: The Macintosh SE/30 is probably the most wanted Compact Macintosh computer due to its various upgrade options, especially the ability to support up to 128MB of RAM with the right SIMM configuration.